Glass Pilot Plant Reactor 1Liter
Performance principle：
Glass Pilot Plant Reactor, the liner is for reaction solvent, and the jacket for heating or cooling resource(cool
liquid,hot water or hot oil), to achieve circulating heating or cooling experiment. And its ancillary equipment-High and low
temperature machine which can satisfy functional high & low temp reaction experiments.
Ancillary equipment:
Circulating water vacuum pump:To provide a vacuum source
Cool chiller:low temperature reaction and Re-flux, condensation
Circulating water/oil bath:Thermal power
High and low temperature machine: high and low temperature experiment reaction
| Send an E-mail to us! | |
Follow Us:
|
|
 ( Click this button to inquiry ) |
|
PRODUCTS
- Glass Reactor Series
- Rotary Evaporator Series
- Water Vacuum Pump Series
- High and Low Temperature Cycling
- Cooling Liquid Circulating Pump Series
- Circulating Water or Oil Bath Series
- Drying Oven
- Hydrothermal Synthesis Reactor
- Microwave Chemical Reactor
- High Pressure Reactor Series
- Short Path Distillation
- Heating Mantle
- Spray Dryer
- Solvent Recovery Machine
- Stainless Steel Reactor
- Other
- Emulsifying Mixer Machine
Whatsapp:+8615036470528
E-mail: [email protected]
Address: Room 104, building 3, Jiatu Industry Park, Hongsong road accrossing lianhua street, High-tech District, Zhengzhou city, Henan Province.
According to the customer's requirements and standard, we manufacture frequency control speed jacketed glass reactor which has many functions to satisfy kinds of experiments. That is, We innovate to assemble rectification column and create jacketed glass reactor production line. It is widely used in modern refined chemical, biological pharmacy, new material synthesis industry research experiment,etc.
OEM is also welcomed. We have rich experience in OEM.
1.GG17 high-borosilicate glass with nice physical-chemical properties; experiment temperature -100 to 400 degree C; Resistant to strong acidic properties of materials; only touching with glass parts & PTFE, no cross-contamination.
2.Double cylinder; kettle cover is separated from kettle body. It is convenient to disassemble, clean and install.
3.Stirring adopts to mechanical sealing, it keeps higher vacuum degree among the same products in the market. It also keeps high vacuum degree when stirring.
4.Glass(PTFE)discharge valve, non-dead angle mixing, fast emptying, no residue.
5. Frequency control speed gear motor, smooth running，high torque, automatic booster, no spark, noise free, long life.
6.SUS frame and cast aluminum material kettle body support, elegant appearance, stable structure.
7.Circulating water/oil bath, high and low temperature machine can supply heating source; Cooling machine:cooling chiller，high and low temperature machine，convenient and practical
8.Scientific & innovative structure, practical, elegant appearance, domestic industry-leading.
9.Explosion proof is optional.
Photo
Main technical datas:
| Model | (EX)S-1L |
| Power supply | AC220V |
| Stirring power(W ) | 60 1/3 Gear Motor |
| Stirring speed(rpm) | 0~600 (Max. 1300) |
| Motor torque | 2000g/cm |
| Reaction flask capacity | 1L |
| Note | Floor Type |
Detailed technical datas:
| Model | S-1 |
| Shaft diameter | 12mm |
| Stirring neck（flange） | Φ33mm 50mm |
| Thermometer（taper） | 19# Φ27mm |
| Condensing neck（1-5taper10-100round） | 24# Φ34mm |
| Liquid feeding neck（taper） | Φ24mm 34mm |
| Bottom discharge neck（flange） | PTFEΦ35mm 40mm |
| Jacket liquid Inlet/Outlet | Φ6mm 12mm |
| Stirrer length,diameter,weight | 465mm Φ80mm 0.4kg |
| Thermowell length,diameter,weight | 280mm Φ13mm 0.03kg |
| Stirring seal ( heitht,diameter,weight) | 180mm Φ50mm 0.6kg |
| Funnel (height, diameter,weight) | 350mm Φ50mm 0.3kg |
| Condenser (length,diameter,weight) | 375mm Φ40mm 0.25kg |
| PTFE bottom discharge (height, diameter, weight) | PTFE170mm Φ68mm 3kg |
